background image

 

16

10.  Instructions for product liquidation after its operating life 

 

VIADRUS a.s., is contractual partner of firm EKO – KOM a.s. with client number F00120649.  
The packages comply with EN 13427. 

 

With  respect  to  the  fact  that  the  product  is  designed  out  of  common  materials  the  individual  parts  are 
recommended to be liquidated in the following manner: 

-

 

exchanger (grey cast iron), by a company engaged in salvage and liquidation of waste 

-

 

tube distributions, jacketing, by a company engaged in salvage and liquidation of waste 

-

 

other metal parts, by a company engaged in salvage and liquidation of waste 

-

 

ROTAFLEX sealing materials in common waste 

 

We recommend to dispose the packages in the following way: 

plastic foil, cardboard cover, use a salvage point  

metal strapping tape, use a salvage point  

wooden  base,  is designated for a single usage and no longer can be used as a product. Its disposal is 
subject to Act. 477/ 2001 Sb. a 185/2001 Coll. as amended.  

 

In  case  that  the  product  has  lost  its  manufacture  qualities  there  can  be  taken  the  advantage  of 
product  taking  back  (if  this  is  established),  in  case  that  the  originator  has  declared  that  this  is  a 
waste and it must be handled according to the valid legislation of the relevant country.  

 
 

11.  Warranty and defect liability 

  

VIADRUS a.s. grants a warranty: 

 

For boilers 24 months after the boiler putting into operation, but maximum 30 months after the date it was 
dispatched from the manufacturing factory.  

 

For boiler drum 5 years after the date its dispatch from the manufacturing factory.  

 

The user is obliged to leave the boiler installation to an assembly company, putting into operation and defect 
removing only to a professional contractual service accredited by the boiler producer VIADRUS a.s. otherwise 
the warranty for proper boiler operation is not valid. 
If  the  boiler  is  operated  according  to  the  instructions  mentioned  in  the  “Instructions  for  the  boiler  operation 
and installation”, the boiler does not require any special professional service interventions. 
“Certification  of  the  quality  and  completeness  of  the  VIADRUS  HERCULES  U  22  BASIC  boiler”  serves  for 
filling in by a contractual service organization as the ”Warranty card”. 
For an eventual jacket reclamation is the customer obliged to submit a packing label of the boiler jacket. It is 
placed on the cardboard in which the jacket is expedited. 

 

The user is obliged to perform a regular control of the boiler – see chapter 9. 

 

Failing to keep the mentioned instructions the warrants provided by the producer are not granted. 
 
Each notice of defect must be made immediately after its finding always in written form and by a 
phone agreement. 

 

The grant does not apply for: 

Faults caused by improper assembly and improper attendance of the product and faults caused 
by improper maintenance see chap. 9 

Faults and damage caused by failure to observe water quality in heating system see chap. no. 4.1 
and 5.3 or by using the anti-freeze mixture 

Faults caused by failure to observe instructions stated in this manual  

-

 

Defects caused by a wrong assembly or incorrect operation of the product 

-

 

Damage of the product during transfer or other mechanical damage 

-

 

Defects caused by improper storage  

 

The producer grants the right for changes performed within the frame of product innovation that may 
not be included in this instruction

Summary of Contents for HERCULES U 22 BASIC

























Reviews: