OPERATING INSTRUCTIONS
Please read and follow the operating instructions
carefully to assure that you will enjoy the convenience
and best use out of your air compressor.
IMPORTANT:
1.
Always operate the compressor AT OR BELOW THE
MAXIMUM PRESSURE RATING of the compressor.
Refer to Specifications section of this manual.
2.
Always OBSERVE THE MAXIMUM DUTY CYCLE of the
air compressor. Refer to Specifications section of this
manual for details. Operations exceeding maximum
pressure ratings and or duty cycle will result in damage
to air compressor.
3.
Your air compressor is equipped with an AUTOMATIC
THERMAL OVERLOAD PROTECTOR. This feature is
designed to protect the air compressor from over-
heating causing permanent damage to your air
compressor. The thermal overload protector will
automatically cut off power to air compressor should
internal operating temperature of the air compressor rise
above safe levels during excessive use.
4.
Should at any time during use, your air compressor
automatically shuts off, do not attempt to restart air
compressor. Turn ON/OFF switch of air compressor to
the OFF position. The automatic thermal overload
protector will automatically reset when internal
temperature of the air compressor drops below safe
level. After allowing air compressor to cool off for about
30 minutes, you can safely resume use of the air
compressor by turning on the air compressor.
5.
Please note that you may experience a slight delay
(about ½ second) of the compressor’s motor starting
when the On/Off Switch is turned on while compressor
is pressurized (when there is pressure in the line that the
compressor is connected to). This is a normal delayed
reaction, not a Compressor ON/OFF switch malfunction.
6.
It is strongly recommended that you keep the vehicle’s
engine running while using the air compressor to
prevent discharge of your vehicle’s battery.
7.
ONLY OPERATE THE AIR COMPRESSOR IN WELL
VENTILATED AREAS. Compressor performance is
enhanced when operating compressor with vehicle
engine running.
