background image

IMPORTANT SAFETY INSTRUCTIONS:

CAUTION:

 To reduce risk of electrical shock or electrocution:

- Do not disassemble. Do not attempt repairs or modifications.

Refer to qualified service agencies for all service and repairs.

- Do not use this product in an area where it can fall or be pulled into water or other liquids.

- Do not reach for this product if it has fallen into liquid.

- Use this compressor with 12-volt DC systems only.

- This product should never be left unattended during use.

WARNING:

 To prevent injury:

- Never allow children to operate this compressor.

Close supervision is necessary when this compressor is being used near children.

- This compressor will become very HOT during and immediately after use.

Do not touch any part of this compressor with bare hands, other than the ON/OFF switch

during and immediately after use.

- Do not use this product near flames or explosive materials or where aerosol products

are being used.

- Do not operate this product where oxygen is being administered.

- Do not pump anything other than atmospheric air.

- Never use this product while sleepy or drowsy.

- Do not use any tools or attachments without first determining maximum air pressure for that

tool or attachment.

- Never point any air nozzle or air sprayer toward another person or any part of the body.

- This air compressor is equipped with an Automatic Reset Thermal Protector, and can

automatically restart after the thermal protector resets. Always cut off power source when

thermal protector becomes activated.

- Wear safety glasses or goggles when operating this product.

- Use only in well ventilated areas.

- After usage, always release excess pressure from the coil hose by turning On/Off switch to the Off

position, disconnect hose from compressor, with the tire inflation gun still connected to the other

end of the coil hose, pull trigger on the tire inflation gun to release excess pressure.

USER MANUAL

400P-RVS AUTOMATIC PORTABLE COMPRESSOR

Summary of Contents for 40044









Reviews: