TIRE INFLATION
This air compressor comes with 1.5 feet heavy duty heat-resistant
leader hose with 1/4” industrial series quick connect stud. By
attaching an air hose with 1/4” industrial series quick coupler to
the leader hose, your air compressor is ready to inflate tires. Read
and follow tire inflation instructions carefully to avoid personal
injury and damage to air compressor or vehicle.
1.
Use heat-resistant, minimum 200PSI-rated working pressure
extension hose. Do not use aftermarket hoses with less than
200PSI working pressure. Some aftermarket hoses may not be
suitable for use with this air compressor due to heat and
pressure typically generated by this type of air compressors.
2.
Use of our convenient 25ft. extension coil hose with in-
line deflator and Built-in Pressure Gauge is
recommended
(Part No. 00025, 5-in-1 Inline Inflator/Deflator).
3.
Use of a close-ended tire chuck will cause excessive
pressure buildup if tire chuck is not attached to tire valve
stem while air compressor is in operation. Always use an
Open-Ended tire chuck such as the tire chuck equipped
on the Inflator/Deflator Coil Hose (P/N 00025) for tire
inflation.
4.
Always inflate tires to manufacturer’s recommended tire
pressures. Exercise extreme caution when driving with aired
down tires. Re-inflate tires before high speed road way travel.
MAINTENANCE & REPAIRS
1.
Periodically check all electrical and fitting
connections. Clean and tighten or repair as needed.
2.
Periodically check all mounting bolts. Tighten as needed.
3.
Replace air filter element periodically. Replacement
frequency depends on operating frequency and
operating environment. For frequent use in dusty
environment, we recommend that you replace air filter
element at least once a month.
4.
Regularly clean dust and dirt from compressor
cooling fins and motor housing.
5.
Your air compressor is equipped with a permanently
lubricated, maintenance-free motor. Never try to
lubricate compressor.
6.
All repairs should be performed by Manufacturer or
Manufacturer’s Authorized Service Agencies only.
CAUTION:
Never touch the air compressor or fittings connected to
the air compressor, with bare hands during or
immediately after usage. The leader hose and fittings
connected to the leader hose will become very HOT
during and after use. If necessary, wear heat resistant
gloves to handle fittings, air line, and leader hose.
