background image

LIMITED WARRANTY:

VIAIR Corporation warrants this product, when properly installed and under normal conditions of use, to be free from defects in 

workmanship and materials for a period of one year from its original date of purchase. To receive warranty service or repair, please 

contact VIAIR Corporation.  

Returns should be made within one year of the date of purchase, after a Return Goods Authorization (RGA) number has been 

assigned by VIAIR Corporation.  To obtain RGA, fax a copy of your receipt to (949) 585-0188. For complete warranty details, please 

visit: 

www.viaircorp.com/warranty

PLEASE NOTE:

THIS WARRANTY COVERS PRODUCT DEFECTS ONLY; IT DOES NOT COVER INCIDENTAL OR CONSEQUENTIAL DAMAGES 

 

AS RESULT OF MISUSE OR ABUSE. 

This Manual is proprietary to VIAIR Corporation and no ownership rights are hereby transferred. No part of the Manual shall be 
used, reproduced, translated, converted, adapted, stored in a retrieval system, communicated or transmitted by any means, for any 
commercial purpose, including without limitation, sale, resale, license, rental or lease, without the prior express written consent of VIAIR.
VIAIR does not make any representations, warranties or guarantees, express or implied, as to the accuracy or completeness of the 
Manual. Users must be aware that updates and amendments will be made from time to time to the Manual. It is the user’s responsibility 
to determine whether there have been any such updates or amendments. Neither VIAIR nor any of its directors, officers, employees 
or agents shall be liable in contract, tort or in any other manner whatsoever to any person for any loss, damage, injury, liability, cost or 
expense of any nature, including without limitation incidental, special, direct or consequential damages arising out of or in connection 
with the use of the Manual.

15 EDELMAN • IRVINE, CA 92618

TEL: (949) 585-0011 • FAX: (949) 585-0188

www.viaircorp.com 

MODEL 400P-RV AUTOMATIC SPECIFICATIONS:

Part Number:   

40047 / 400P-RV Automatic

Motor Voltage:  

12-volt

Motor Type:  

Permanent Magnetic

Max. Intermittent Pressure:  

150 PSI

Max. Duty Cycle:  

33% (20 min. on / 40 min. off)

(Min. On/Off @ 72ºF & 100 PSI)

Max. Current Consumption:  

30 amps

Fuse:  

40 amp

Inline Pressure Gauge:  

160 PSI

Built-in Pressure Switch:  

130 PSI / On

 

155 PSI / Off

Automatic Reset Thermal Protection:  Yes

400P-RV AUTOMATIC PORTABLE COMPRESSOR

*Tolerance: 

± 3%

Summary of Contents for 400P-RV









Reviews: