TLC PRO COMPRESSOR KIT
USER MANUAL
IMPORTANT SAFETY INSTRUCTIONS
CAUTION - To reduce risk of electrical shock:
- Do not disassemble or attempt to repair or modify unit while it is still connected to the vehicle.
- Do not use this product in an area where it can fall or be pulled into water or other liquids.
- Do not reach for this product if it has fallen into liquid.
- Use this compressor with 12-Volt DC systems only.
- This product should never be left unattended during use.
WARNING - To prevent injury:
- Close supervision is necessary when this compressor is being used near children. Never allow a
child to operate this compressor.
- This compressor will become very HOT during and immediately after use. Do not touch any parts
with bare hands, other than the ON/OFF switch during and immediately after use.
- Do not use this product near flames or explosive materials or where aerosol products are being
used.
- Do not operate this product where oxygen is being administered.
- Do not pump anything other than atmospheric air.
- Never use this product while sleepy or drowsy.
- Do not use any tools or attachments without first determining maximum air pressure for that tool
or attachment.
- Never point any air nozzle or air sprayer toward another person or any part of the body.
- This air compressor is equipped with an Automatic Reset Thermal Protector, and can
automatically restart after the thermal protector resets. Always cut off power source when thermal
protector becomes activated.
- Use only in well ventilated areas.
- After use, always release excess pressure from the coil hose and tank. Turn off the unit and with
the inflator still connected to the hose, pull the trigger to release excess pressure.
TLC PRO COMPRESSOR KIT COMPONENTS LIST:
Please familiarize yourself with the components list in this manual before you begin to use your
compressor.
A. TLC PRO Compressor
B. TLC Inflator with 160 PSI gauge
C. Rebuildable Presta Head attachment
D. 90-Degree Twist-on Schrader attachment
E. 2-Pin SAE connector attachment with Battery Clips
F. 2-Pin SAE connector attachment with Terminal Rings
G. Air Filter housing with (2) replacement air filter elements
H. 30ft. Inside Braided Coil Hose
I. Inflation tips kit
J. Blow Gun
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
