background image

ESCAPADE HEAVY DUTY & CONSTANT DUTY COMPACT OBA SYSTEMS

USER MANUAL

SPECIFICATIONS

• 50001 – Escapade Heavy Duty Compact OBA: 110/145 PSI (CE Certified)

Motor Voltage: 

12-Volts 

Max. Current Consumption: 

30-Amps 

Recommended Fuse: 

40-Amps

Motor Type: 

Permanent Magnetic

Horsepower: 

1/4

Max. Working Pressure: 

150 PSI

Max. Duty Cycle (@72°F & 100 PSI): 

33%

min.tes On/Off (@72ºF & 100 PSI):  

20 On/ 40 Off 

Max. Ambient Temperature: 

158°F

min. Ambient Temperature: 

-40°F

Auto. Reset Thermal Protection: 

Yes

Ingress Protection Rating: 

IP67

• 50003 – Escapade Constant Duty Compact OBA: 110/145 PSI (CE Certified)

Motor Voltage: 

12-Volts 

Max. Current Consumption: 

23-Amps

Recommended Fuse: 

30-Amps 

Motor Type: 

Permanent Magnetic

Horsepower: 

1/4

Max. Working Pressure: 

150 PSI

Max. Duty Cycle (@72ºF & 100 PSI): 

100%

min.tes On/Off (@72ºF & 100 PSI):  

Continuous 

Max. Ambient Temperature: 

158°F

min. Ambient Temperature: 

-40°F

Auto. Reset Thermal Protection: 

Yes

Ingress Protection Rating: 

IP67

ABOUT COMPRESSOR DUTY CYCLE:

Duty cycle refers to the amount of time a compressor can be 

operated in a given time period at 100 PSI, and a standard ambient temperature of 72° F. It is 

commonly expressed in percentage format: Compressor on time ÷ (on time + off time) = Duty Cycle%.

ONE-HOUR DUTY CYCLE   

MINUTES ON / 

(100 PSI @ 72°F)

 

  MINUTES 

OFF

  9% 

 5 min. On / 55 min. Off

  10% 

 6 min. On / 54 min. Off

  15% 

 9 min. On / 51 min. Off

  20% 

12 min. On / 48 min. Off

  25% 

15 min. On / 45 min. Off 

  30% 

18 min. On / 42 min. Off

  33% 

20 min. On / 40 min. Off

  50% 

30 min. On / 30 min. Off

100% 

1 Hour Run Time

NOTE:

 All compressors, regardless of rated duty cycle, require sufficient rest time in between cycles 

to allow for partial or complete heat dissipation. Heat dissipation rates may vary depending on 

ambient temperatures and operating conditions.

ABOUT RATED WORKING PRESSURE:

To ensure trouble free service life of your compressor, always operate compressor within rated 

working pressure of the compressor. Never use a pressure switch with a higher cut-off pressure than 

compressor's rated working pressure. 

Summary of Contents for 50001









Reviews: