ESCAPADE HEAVY DUTY & CONSTANT DUTY COMPACT OBA SYSTEMS
USER MANUAL
TIRE INFLATION GUN OPERATING INSTRUCTIONS
Your Escapade HD/CD Onboard Air System also comes with a Tire Inflation Gun for airing up tires
and adding compressed air to any inflatable items with a valve stem.
1. Using the Tire Inflation Gun:
Using a 1/4" Quick Connect Coupler, connect the Tire Inflation Gun to an air hose and connect to a
tire valve stem or similar inflation collar by securing the folding lever on the Inflation Gun air chuck.
2. Filling Tires and other Inflatable Items:
Squeeze the Inflation Trigger on the Inflation Gun by pressing it towards the handle of the gun. This
will allow stored air from the air tank to flow through the gun and through the chuck into your tire or
other inflatable items.
3. Checking Tire Pressure:
To check tire pressure, release Inflation Trigger on Inflation Gun and allow the needle of the 0-160
PSI gauge to settle. Tire pressure will be able to be read only when the inflation trigger is released.
WARNING:
- Never operate the Inflation Gun at any pressure exceeding 160 PSI.
- Use caution when attaching or removing air chuck from valve stems.
- Always ensure that tire valve stems are tight before inflating tires.
- Be careful to never inflate any tire or other inflatable items past its rated pressure to avoid
explosion, possible injury, or death.
Please Note:
Not intended for use with regular portable compressors or units meant to be operated
with an open ended air chuck. The Tire Inflation Gun is equipped with a close ended chuck and will
hold pressure back, which could cause the hose to burst.
VIAIR TIRE INFLATION GUN
Bleeder Valve
Quick Connect Stud
Inflation Trigger
0-160 PSI Gauge
Lever Air Chuck
