77P PORTABLE COMPRESSOR
FEATURES:
1. Illuminated Pressure Display
2. LED Work Light
3. Accessory Power Port Plug
4. 3-Pc. Inflation Tips Kit
5. Deluxe Carry Bag with Bright Orange Lining for Enhanced Visibility
6. Automatic Reset Thermal Overload Protector
7. Piston Type Compressor
8. Oil-Less Design
9. Gearless Direct-Drive Motor
10. Permanently Lubricated Bearings
11. Compact Size for Easy Carrying and Storage
12. High Strength Stainless Steel Valves
13. Anodized Aluminum Alloy Cylinder
OPERATING INSTRUCTIONS:
CAUTION: To avoid over inflation, never exceed recommended pressure. Doing so may cause
articles to burst and can cause serious bodily injury. Always make sure the Portable Compressor’s
power cord is uncoiled and fully extended when using your air compressor to avoid overheating the
power cord.
INFLATING CARS & MOTORCYCLE TIRES:
IMPORTANT: Engine must be running while using this compressor.
1. The compressor is designed to operate on 12 volts DC. To obtain power,
plug the power cord into a 12-volt cigarette lighter socket or other 12-volt power source.
2. Start vehicle’s engine to provide charging voltage.
3. Attach the end of the air hose to the tire valve stem.
4. Turn the compressor power switch to ON and begin to inflate tire.
5. When the illuminated pressure display indicates the desired pressure, switch the unit OFF and
remove the air hose from the tire valve stem.
FOR ALL OTHER INFLATABLE OBJECTS, INCLUDING
BICYCLE TIRES, TOYS, AND SPORTS BALLS:
IMPORTANT: Engine must be running while using this compressor.
1. A selection of inflation tips is provided to fit some inflatable objects.
Simply screw the appropriate nozzle into the tip of the air hose.
2. Attach the appropriate nozzle to article to be inflated and turn the power switch
to the ON position.
3. When article is inflated to desired firmness, turn the compressor off. Do not over inflate.
MAINTENANCE INSTRUCTIONS:
Turn OFF and unplug Air Compressor. Your air compressor is equipped with a permanently
lubricated, maintenance-free motor. Never try to lubricate the compressor. Use only mild soap and
a cloth dampened with hot water to clean plastic parts. Avoid any type of detergents or solvents,
which might contain chemicals that could damage plastic portions or painted surfaces of the
compressor. All other services should be performed by a qualified person.
USER MANUAL
