LIMITED TWO-YEAR WARRANTY
Vianni by A-1 AccuTech Inc., warrants to the original purchaser of its Vianni food warming equipment against
defects in materials or workmanship under normal use for two years after the date of sale to the original
purchaser. No other warranty or affirmation of fact, expressed or implied, statutory or otherwise, including
without limitation any implied Warranties of Merchantability or Fitness for Purposes are authorized.
The seller shall not be held liable for direct, indirect or consequential damages in connection with Vianni
commercial food warming products. Liability is limited to and shall not exceed the purchase price paid. The
warranty does not cover products damage in any manner contrary to the installation and product manual
including improper utility connection, improper installation or maintenance, work performed by unauthorized
personnel, damage from improper cleaning, water damage to controls or carelessness that occurs as a result
of accident, neglect, alteration, damage during transit, delivery or installation, fire, flood, act of God.
Please follow the following steps to make sure that your warranty claim will be addressed properly.
End Users (Operators) of Product:
For any product believed to be defective within the warranty period, first
write or call the dealer from whom the product was purchased.
Dealers:
Please contact Vianni / A-1 Accutech Inc., for details
The title and risk pass of loss to buyer on delivery to common carrier. If the product was damaged in transit to
you, a claim must be filed with the carrier. Any person desiring to make a claim must do it within six months
after the expiration of the warranty claim.
Vianni Products.
1717 North Naper Blvd.
Naperville, IL 60563
(630) 470-6887
Info@vianniproducts.com
www.vianniproducts.com
©2014 A-1 Accutech, Inc. Vianni is a trademark of A-1 Accutech, Inc.
FDA
TROUBLESHOOTING
Unit does not reach operating temperature
1.
Adjust temperature control knob to a higher setting.
2.
Check if there are air currents from air conditioning or exhaust
ducts. If so, move to another location or block the currents.
Unit temperature is too hot
1.
Adjust temperature control knob to a lower setting by
turning knob counter clockwise.
2.
Check with qualified personnel or electrician that the power
source equals the units specification.
Unit is not working
1.
Check if unit is plugged in.
2.
Turn temperature control clockwise until light is illuminated.
3.
Confirm with qualified electrician that power supply
matches specifications.
If all of the above are okay, and you still have problems, contact a qualified repair shop.
If the supplied cord is damaged, it should be replaced with an identical cord.
WARNING
Electric shock hazard
:
Always turn off and disconnect the power source before servicing or cleaning unit.
