6
About Daily Check
Warnings and Cautionary Advices
To ensure better tracking of your health status, it is strongly suggested that every
Daily Check measurement is made at the same time period when your body is in
the relative same situation. E.g., every morning when get up, or every night
before go to bed.
Daily Check measurement is a function that combines the measuring of ECG
(Electrocardiograph) waveform, HR (heart rate), SpO2 (blood oxygenation), PI (Pulse
Index), systolic Blood Pressure. It takes only 20 seconds to collect your vital signs before
giving results.
Using Daily Check
To start a Daily Check, follow the steps as below.
1.
Tap the <
Daily Check
> icon in the middle
of the Main screen.
2.
Hold the device according to the
instruction, keep the device at the same
level as your heart, and keep stable
posture and stay calm. Don’t exert too much pressure on the ECG electrode,
which may result in EMG (electromyograph) interference. Just hold gently and
ensure good contact with the ECG electrode. Do not exert pressure on the finger
that put in the SpO2 sensor. Just fit it inside but gently to ensure good blood
perfusion.
(1)
Put the right forefinger into the built-in SpO
2
sensor. Use the finger nail to
(1)
(4)
(1)
(2)
squeeze the edge of the SpO
2
sensor cover, then move in upward to the left
to raise it up as shown below.
(2)
Press the right thumb on the right electrode.
(3)
Press the right middle finger on the back
electrode.
(4)
Press the left electrode to the left palm.
3.
Once the device detects stable waveform, it will
automatically start the measurement. The countdown
bar moves from left to right.
