9
4.
When the device detects stable waveform, it will automatically start the
measurement. The countdown bar moves from left to right.
5.
When the bar is fully filled, the device will analysis your data, and then show the
measurement result.
Measuring with Cable (Optional)
1.
Connect the external SpO2 sensor to the multi-functional connector.
2.
Put your index finger or middle finger into the external SpO2 sensor. Make sure
the cable is positioned along the top of the hand, and the finger nail is in the
position as shown below.
Finger nail position
3.
If the device is power off, press the Home button. Tap the <Pulse Oximeter> icon.
4.
The display will then show your PLETH waveform, SpO2 and pulse rate.
The device will monitor continuously, however no data will be saved until you
press the button.
5.
Press the button to start collecting your SpO2 data. The countdown bar moves
from left to right.
6.
When the bar is fully filled, the device will analysis your data, and then show the
measurement result.
