Operation, Remote Operation
Scenario Commands
1-2-5
ATC-5000NG ATC/DME Test Set Operation Manual
Rev. L0
Page 86
Subject to Export Control. See Cover Page for details.
February 2020
5.7.4.2
AIRCRAFT SIZE
5.7.4.3
AIR/GROUND STATE
5.7.4.4
ALTITUDE TYPE
Command Syntax:
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:} <intruder
no>{:AVSIZE}SP<numeric>CR
Description:
This command sets the A/V size of the specified intruder. This command is valid only for
intruders with AG state grounded. The <intruder no> specifies the number of the intruder in the
channel grouping specified.
Numeric:
0 to 15 (decimal ASCII)
Value
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Meaning(Length meters/Width meters)
No Data
15/23
25/28.5
25/34
35/33
35/38
45/39.5
45/45
55/45
55/52
65/59.5
65/67
75/72.5
75/80
85/80
85/90
Example:
:ATC:SCE:DYN:1:AVSIZE 11\r
Command Syntax:
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:} <intruder
no>{:AGSTATE}SP<numeric>CR
Description:
This command sets the AG state of the specified intruder. The <intruder no> specifies the
number of the intruder in the channel grouping specified.
Numeric:
0 to 3 (decimal ASCII)
Value
0
1
2
3
State
Subsonic
Supersonic
Grounded
Reserved
Example:
:ATC:SCE:DYN:2:AGSTATE 2\r
Command Syntax:
{:ATC |:ATC5000NG}{:SCE |:SCENARIO}{:STAT: |:STATIC: |:DYN: |:DYNAMIC:} <intruder
no>{:ALTTYPE}SP<numeric>CR
Description:
This command sets the altitude type of the specified intruder. The <intruder no> specifies the
number of the intruder in the channel grouping specified.
Numeric:
0 to 1 (decimal ASCII)
Value
0
1
Altitude Type
Pressure Altitude
Geometric Altitude
Default:
0
Example:
:ATC:SCE:DYN:1:ALTTYPE 1\r
Summary of Contents for 138156
Page 3: ......
