Operation, Remote Operation
DME Commands
1-2-5
ATC-5000NG ATC/DME Test Set Operation Manual
Rev. L0
Page 132
Subject to Export Control. See Cover Page for details.
February 2020
5.11.9
IDENT CHARACTER
5.11.10
IDENT CODE
5.11.11
IDENT DASH
5.11.12
IDENT DOT
5.11.13
IDENT MODE
Command Syntax:
{:ATC |:ATC5000NG}{:DME:IDENT{:CHAR | CHARACTER} SP<numeric>CR
Description:
This command sets the time associated with generating a character for Morse Code.
Numeric
150 to 750 ms (decimal ASCII)
Default Value:
450 ms
Example:
:ATC:DME:IDENT:CHAR 400\r
Query:
:ATC:DME:IDENT:CHAR?\r
Return:
400
Command Syntax:
{:ATC |:ATC5000NG}{:DME:IDENT:CODE } SP<characters>CR
Description:
This command selects the message that is generated in Morse Code.
Characters:
1 to 8 Alphanumeric
Default Value:
12345678
Example:
:ATC:DME:IDENT:CODE 2763\r
Query:
:ATC:DME:IDENT:CODE?\r
Return:
2763
Command Syntax:
{:ATC |:ATC5000NG}{:DME:IDENT:DASH} SP<numeric>CR
Description:
This command sets the time associated with generating a dash for Morse Code.
Numeric
150 to 750 ms (decimal ASCII)
Default Value:
450 ms
Example:
:ATC:DME:IDENT:DASH 500\r
Query:
:ATC:DME:IDENT:DASH?\r
Return:
500
Command Syntax:
{:ATC |:ATC5000NG}{:DME:IDENT:DOT} SP<numeric>CR
Description:
This command sets the time associated with generating a dot for Morse Code.
Numeric
50 to 250 ms (Decimal ASCII)
Default Value:
150 ms
Example:
:ATC:DME:IDENT:DOT 75\r
Query:
:ATC:DME:IDENT:DOT?\r
Return:
75
Command Syntax:
{:ATC |:ATC5000NG}{:DME:IDENT:MODE} SP{TONE | CODE | OFF}CR
Description:
This command selects the mode of operation for DME identification.
Default Value:
OFF
Example:
:ATC:DME:IDENT:MODE TONE\r
Query:
:ATC:DME:IDENT:MODE?\r
Return:
TONE
Summary of Contents for 138156
Page 3: ......