Chapter 4
Configuring System Settings
Establishing a Network Connection
Rev. 001
CX300 ComXpert Operation Manual
22130634
4 - 10
February, 2022
6.
Return to the
System Network panel
. The network profile just created now appears
on the list.
4.4.2.2 Connecting to a WiFi Network
The CX300 can be connected to any compatible WiFi network within range of the device
for which you have authorized access (and a password for authentication).
To Connect to a WiFi Network
1.
Enable network connectivity on the CX300.
See section 4.4.1.1, “Enable Network
for information.
2.
Navigate to the
Network panel
(System button > Network button).
3.
Select the
WiFi button
located on the soft-key panel.
4.
The device automatically scans for WiFi networks and lists each network with the
following status:
Key
Management
Select the Wi-Fi Protected Access (WPA) key management.
Network
Mode
Select the Network Mode.
Additional settings are required based on the selected Network
Mode of operation. See the appropriate section to complete
network configuration:
See section 4.4.1.2.2, “IPv4 Network Mode Settings”, on page
.
See section 4.4.1.2.3, “IPv6 Network Mode Settings”, on page
.
See section 4.4.1.2.1, “IPv4/IPv6 Dual Stack Network Mode
Setting
Value
