Chapter 4
Configuring System Settings
Setting Date and Time
Rev. 001
CX300 ComXpert Operation Manual
22130634
4 - 4
February, 2022
4.3 Setting Date and Time
The following procedures identify how to set the international settings:
4.3.1 To Set International Settings
1.
Proceed to the to the
Region screen
.
2.
In the
Language
box, select the language for the user interface. The formatting
standard changes automatically.
3.
In the
Samples for selected formatting
box, the date, time, and number
formatting appear.
4.
To change the formatting standard, click the
Change formatting standard
box
and select a country.
5.
In the
Customize
box, click the check box next to
Use 24-hour time
.
6.
Reboot the test set to apply the changes. The UI is now using the language
specified.
4.3.2 To Set the Date
1.
Proceed to the
Date and Time screen
.
2.
Set the calendar to the desired month, day, and year. Changes are applied when
selected.
4.3.3 To Set the Time Zone Proceed to the Date and Time screen.
1.
Select the
Region, Country, and Area
.
2.
Select the
Automatically adjust for daylight savings time
check box to
enable DST.
4.3.4 To Manually Set the Time
1.
Proceed to the
Date and Time screen
.
2.
Use the
Up
and
Down
arrows
to adjust the hour and minutes on the clock.
Changes are applied when selected.
3.
Select
AM
or
PM
. Changes are applied when selected.
4.3.5 To Set the Time Format
The following procedure describes how to set the date and time.
1.
Proceed to the
Date and Time screen
.
2.
Select the
Use 24-hour time
check box to display the time in HH:MM:SS format.
