FVAi-2030 Benchtop Microscope User Guide, 22112369-339 R000, Standard
3-5
Fiber inspection during standalone operation
Capturing images
Capturing images
In Live view, you can capture images of the fiber end face and save them to the microscope and recall them for
later analysis. For information about accessing images saved to the microscope, see
Note:
Captured images saved to the microscope cannot be accessed via FiberChekPRO. If you require use of
FiberChekPRO to manage images, connect the microscope to a computer where FiberChekPRO is
installed and use FiberChekPRO to capture the image (see
“Using the FVAi-2030 microscope with
),.
“Requirements for Pass/Fail tests” on page 3-2
.
Step 2 In Live view, tap the touchscreen to access the inspection tools (see
“Accessing Live view” on page 2-8
).
Step 3 Select
Capture
.
The captured image appears.
Step 4 Tap the touchscreen to display tools for working with the image and accessing the
Inspection Settings
menu.
Step 5 Select
Save
to save the captured image to the microscope.
