FVAi-2030 Benchtop Microscope User Guide, 22112369-339 R000, Standard
4-3
Using the FVAi-2030 microscope with FiberChekPRO
Performing Pass/Fail tests and generating reports
Performing Pass/Fail tests and generating reports
FiberChekPRO lets you generate a fiber inspection report using the results of a Pass/Fail test performed with
FiberChekPRO. This report provides a detailed summary of the test performed during an analysis. The report also
includes the date and time that the test was performed, detailed fiber information and, when available,
information such as company name, location, and operator information.
Note:
The date and time information on a report reflects the date and time that the Pass/Fail test was
performed. The format used for the date reflects the system settings on the computer where
FiberChekPRO software is installed.
You generate a report by saving the inspection data immediately after performing a Pass/Fail test using
FiberChekPRO. By default, reports are saved to HTML format.
Note:
Refer to the
FiberChekPRO Automated Fiber Inspection and Analysis Software User Manual
for detailed
information about using the tools of the software to analyze and manage test results, as well as
information about specifying the format (HTML or PDF) reports are saved to.
“Requirements for Pass/Fail tests” on page 3-2
.
Step 2 Connect the microscope to FiberChekPRO (see
“Connecting to FiberChekPRO” on page 4-2
).
Step 3 In FiberChekPRO, refer to the Focus-quality meter to ensure that live image is suitable for inspection.
Step 4 Click
TEST
to start the test.
