FVAi-2030 Benchtop Microscope User Guide, 22112369-339 R000, Standard
1-1
1 Overview
The FVAi-2030 Benchtop Microscope is the ideal microscope to control contamination during optical connector
manufacturing. Equipped with 30x optics, ultra-wide field-of-view, dual magnification, automatic focus, and built-
in end face analysis, the FVAi-2030 gives operators fast and complete visibility of the entire ferrule end face so
that any contamination on or near the fiber end face can be quickly found.
Operators can use the FVAi-2030 as a standalone device or in conjunction with the FiberChekPRO™ inspection
and analysis software.
Figure 1-1: FVAi-2030 Benchtop Microscope
FiberChekPRO Fiber Inspection and Analysis software
Designed to operate on a PC/laptop, FiberChekPRO instantly captures, analyzes, and grades fiber end-face images
to determine acceptability of the end faces. It identifies and characterizes defects and contamination, and then
provides a pass or fail result according to preconfigured criteria. In addition, users can customize settings, as well
as archive data and generate reports.
This section covers the following information:
•
“Ordering information” on page 1-2
•
“Technical Assistance Center and Knowledge Base” on page 1-3