FVAm™ Series Benchtop MPO Autofocus Microscope User Guide
22132675 Rev. 101, Standard, C-2
Appendix C
System reset
Step 3. On the
Setup
page for the microscope, select the
Firmware
option in the navigation pane, and then click
System Reset
.
Note:
The
System Reset
button is available only while the firmware version installed on the FVAm microscope
is either the same version defined by the system-reset threshold or a later version.
Step 4
Click
Next
to either download the system reset package or proceed to the next dialog.
Note:
The system reset package is downloaded only during a first-time system reset.
A dialog containing warning information appears.
Step 5
Review the information, and then click
Reset
to start the system reset.
Note:
A system reset can take several minutes to complete.