MPOLx-84/85 (P)
63
6 L
OSS
/L
ENGTH
T
EST
O
PERATION
S
AVING
TEST
RESULTS
Fig. 20 1300 nm result details page with deselected fibers.
Saving test results
Before starting a measurement a project must be selected and
set to active. Thus, all results are assigned to that project when
saved. If no project was defined by the user, the instrument will
use the Test-Tool project “default”, which is always present.
Results are stored simply by pressing the
[
G
]
key. Each time the
key is pressed, the result just displayed will be saved.
NOTE:
Instruments with an integrated patch cord microscope (“PCM”)
use a specific app, also called “PCM”, to operate that microscope.
Therefore, images taken by the PCM can easily be distinguished
from images taken by an external probe.
To save results:
I
The instrument displays the results (overview or details) to be
stored.
1.
Press the
[
G
]
key.
The Save dialog is displayed.
1
1
2
3
4
3
5
