66
MPOLx-84/85 (P)
7 S
OURCE
O
PERATION
(MPOLS)
S
ELECTING
A
WAVELENGTH
Selecting a wavelength
Only one wavelength can be selected at a time.
To select a wavelength:
J
Tap the desired wavelength.
– or –
Press the
[
A
]
key, tap the
[
Source Selection
]
button and tap
the desired wavelength (toggle function).
Selecting and deselecting fibers
By selecting/deselecting a fiber the output can be enabled/
disabled. When disabled the fiber is greyed out in the fiber panel
showed in the measurement display.
To select/deselect a fiber:
1.
Press the
[
A
]
key, tap the
[
Fiber Selection
]
button.
The fiber selection panel opens.
2.
Tap a fiber to select/deselect it.
– or –
Press the left/right arrows keys to highlight a fiber and press
the center key to select/deselect it.
3.
To leave the menu tap
[
Done
]
or press the
button.
Changing fiber output manually
NOTE:
The fiber output can be changed manually only when auto fiber
output is disabled.
To disable auto fiber output:
J
Tap the
button until
ON
disappears.
To change fiber output manually:
J
Tap the
buttons to output the previous or next fiber.
5
Laser on/off
J
Tap to switch laser on/off.
6
Auto fiber output
J
Tap to start/stop auto fiber
output.
7
Manual fiber output
J
Tap to select previous/next
fiber.
