MPOLx-84/85 (P)
69
8 P
OWERMETER
O
PERATION
(MPOLP)
S
HOWING
THE
MEASURED
VALUES
IN
GRAPHIC
MODE
Showing the measured values in graphic
mode
In graphic mode bars showing the measured levels (depending
on the selected measurement mode as absolute, relative or
pass/fail results).
When selected the fiber number is highlighted in dark blue
(instead of light blue) and the level is shown numerically.
To choose a fiber:
J
Press the left/right arrow keys.
Relative measurement mode
Fig. 22 Measurement display overview, laser off (left) and laser on.
1
2
3
8
5
6
7
4
9
1
Display mode
J
Tap to switch
between table view
and graphical view.
2
Numerical value in dB above or below reference value.
3
Fiber panel
Fiber without a valid reference level or
a valid measurement level. In this case the
fiber could be deselected at the Source
device.
J
See
to select
fibers.
Fiber with a valid reference level and a
valid measurement level.
J
Press left/right arrow
keys to choose fiber.
Fiber chosen. Additionally the
numerical measurement value is displayed.
