MPOLx-84/85 (P)
35
4 B
ASIC
O
PERATION
C
HANGING
S
YSTEM
S
ETTINGS
To set 24-hour or 12-hour time:
1.
Tap
[
Time Format
]
.
2.
Select the desired time format.
Setting the Ethernet protocol
J
In the
menu tap the
[
More
]
button,
then tap
[
Ethernet
]
.
To select the IP mode:
1.
Tap the
[
IP Mode
]
button.
2.
Select the desired Ethernet mode.
To set the IP address:
I
The IP mode
Static
is selected.
1.
Tap
[
IP Address
]
.
2.
Type in the desired IP address.
3.
Tap
[
OK
]
.
To set the gateway:
I
The IP mode
Static
is selected.
1.
Tap
[
Gateway
]
.
2.
Type in the desired gateway.
3.
Tap
[
OK
]
.
To set the netmask:
I
The IP mode
Static
is selected.
1.
Tap
[
Netmask
]
.
2.
Type in the desired netmask.
3.
Tap
[
OK
]
.
Calibrating the touchscreen
NOTE:
Using a pen when calibrating the touchscreen will improve the
calibration accuracy.
1.
In the
menu tap the
[
More
]
button,
then tap
[
Touchscreen calibration
]
.
2.
Follow the given instructions.
Resetting to the factory default values
NOTE:
Setting the factory default values does not affect your stored
measurement results.
