MPOLx-84/85 (P)
49
6 L
OSS
/L
ENGTH
T
EST
O
PERATION
D
EFINING
A
TEST
CONFIGURATION
The available test profiles are displayed.
2.
To highlight a test configuration tap it once.
– or –
Use the arrow keys.
3.
Tap the
button.
– or –
Press the
[
A
]
key and tap
[
Set Active
]
.
Allow a few seconds until the label
ACTIVE
is displayed at the
selected test configuration.
Deleting a test configuration
I
The instrument is in
Loss/Length
mode.
1.
Press the
[
A
]
key and tap the
[
Test Configuration
]
button.
2.
To highlight a test configuration tap it once.
– or –
Use the arrow keys.
3.
Press the
[
A
]
key and tap the
[
Remove
]
button.
4.
Tap
[
Yes
]
to confirm and permanently delete the
configuration.
The configuration is deleted and removed from the list.
Editing a test configuration
NOTE:
You can not change the name of an existing test configuration.
To change the name copy the configuration, type in the new
name and delete the original configuration.
I
The instrument is in
Loss/Length
mode.
1.
Press the
[
A
]
key and tap the
[
Test Configuration
]
button.
The available test configurations are displayed.
2.
Tap and select an entry.
– or –
