29
www.viavito.com
Belt Adjustment
Place the treadmill on a level surface. Turn the treadmill on at a speed of 6-8 km/h.
Observe in which direction the running belt is deviating. Before adjusting the belt make
sure you turn the treadmill off, remove the safety key and unplug the power cord.
If the belt has drifted to the right, unplug
the safety key and the power cord and
turn the right adjusting bolt a 1/4 turn
clockwise. Then insert the power cord and
the safety key, turn the treadmill on and
set it to run at 8kph, watch to see where
the belt position moves to. Repeat above
steps until the running belt is positioned
in the middle.
If the belt has drifted to the left, unplug
the safety key and the power cord, and
turn the left adjusting bolt a 1/4 turn
clockwise, then insert the power cord and
the safety key, turn the treadmill on and
set it to run at 8kph, watch to see where
the belt position moves to. Repeat above
steps until the running belt is positioned
in the middle.
The treadmill belt will gradually lose
tension after a period of time of use. If
the belt starts to slip then unplug the
safety key and the power cord. Turn the
two adjusting bolts a 1/4 turn clockwise,
and insert the safety key and power cord.
Then start the treadmill and test to con-
firm if the belt no longer slips. Repeat the
above steps until the belt is moderately
tight and does not slip.