15.
The factory speaker is secured to the
door using rivets. To remove the
speaker, drill out the rivets using a 5mm
drill bit. Take care not to damage the
vehicle and ensure protective eyewear
is worn. Once all rivets are removed,
unplug the speaker, and remove.
Note: Ensure the window is in the up
position when drilling the rivets.
16.
Ensure the door panel is clean and free
from grease and dirt. Apply the self-
adhesive sound deadening to the door
panel directly behind the speaker as
shown. For maximum coverage cut the
sound deadening in half and place
above and below the door
strengthening bar
11.
Affix the self-adhesive wave diffuser
directly behind the speaker. Ensure
its firmly secured as not to obstruct
the window when open.
10.
Fix the speaker bracket to the door
panel by lining up the securing holes
and using nuts & bolts or
screw/rivets
(not provided)
to secure
the mounting bracket to the door
Replacing the Door Speakers
