Vibe Slick SLR 12 Active Limited Edition, Instruction Manual

GROUND CABLE

• The ground cable needs to carry the same current as the power cable. At least a 10 gauge 

cable should be used.

• The amplifi er ground should be connected directly to the chassis of the vehicle, to bare 

metal.

• The cable length should be kept to an absolute minimum. It is not recommended that you 

connect the ground cable to the vehicle’s seatbelt anchor point.

REMOTE TURN ON

• A minimum of 18 gauge cable should be used for this connection.
• The cable should be run with exactly the same care and attention as the power cable and 

taken back to the source (headunit) and joined to the remote cable provided.

• If the source (headunit) does not have a remote turn on cable then a 12v supply should be 

used. This will require a switch to be fi tted inline to enable the amplifi er to be turned on and 
off. Remember that if this switch is left on you will fl atten the car battery.

RCA CABLES

• Please take extra care when running these cables from the source to the amplifi er. Ensure 

that they are placed away from all items that can generate any interference, wiring har-
nesses etc.

• It is recommended that the RCA cables should be run on the opposite site of the car to any 

previously installed power cables, if possible.

INPUT CONNECTIONS

BATTERY

FUSE

Connect to
chassis / ground
of vehicle

Connect to remote turn-on
lead of source unit

SOURCE (HEAD UNIT)

5

Slick SLR 12 Active Limited Edition Subwoofer Enclosure