ii
Safety Instructions
Safety precautions and maintenance
WARNING: Use of controls, adjustments or procedures other than those specified in this
documentation may result in exposure to shock, electrical hazards and/or mechanical
hazards.
Read and follow these instructions when connecting and using your display:
Operation:
• Keep the display out of direct sunlight and open flames, hot appliances, or any other heat sources.
• Remove any object that could fall into ventilation holes or prevent proper cooling of the display’s
electronics.
• Do not block the ventilation holes on the Vibe.
• When positioning the display, make sure the power plug and outlet are easily accessible.
• When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the
power cord for normal operation.
• Ensure the use of an approved power cord at all times. If your power cord is missing, please contact
your local service center.
• Do not subject the display to strong vibration or high impact during operation.
• Avoid dropping the display during operation or transportation.
• This apparatus is intended to be supported by a UL Listed Wall Mount Bracket or equivalent.
Maintenance:
• To protect your display from possible damage, do not put excessive pressure on the LCD panel. When
moving your display, hold the frame to lift; do not lift the display by placing your hand or fingers on
the LCD panel.
• Unplug the display if you are not going to use it for an extensive period of time.
• Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with
a dry cloth when the power is off. Never use organic solvent, such as alcohol, or ammonia-based
liquids, to clean your display.
• To avoid the risk of shock or permanent damage to the hardware, do not expose the display to dust,
rain, water, or a moist environment.
• If your display becomes wet, wipe it with a dry cloth as soon as possible.
• If a foreign substance or water gets in your display, turn the power off immediately and disconnect
the power cord. Then remove the foreign substance or water and send the unit to the maintenance
center.
• Do not store or use the display in locations exposed to heat, direct sunlight or extreme cold.
• In order to maintain the best performance of your display and ensure a longer lifetime, we strongly
recommend using the display in a location within the following temperature and humidity ranges:
-
Temperature: 0-40°C 32-104°F
-
Humidity: 20-80% RH
-
Altitude: 5000m
