background image

2

2. 

Stand Installation (Optional)

2.1.  Vibe Assembly notes

1.  Caution: The Vibe board and stand are heavy and require a minimum of two people to install. Use 

caution when lifting them.

2.  If screws are found missing or loose, please contact professional repair services or contact Vibe 

customer service.

3.  Caution: If you choose a third-party wall mount, the wall mount chosen should be able to support 120 

lbs plus the self weight of the mount.

4.  Avoid high temperature, explosive gas and strong electromagnetic interference during installation.
5.  Keep the product away from direct sunlight.
6.  To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other 

liquids. Do not touch the board with wet hands. Do not install this product near flammable objects 

such as gasoline or candles, or expose the board to direct air conditioning.

7.  Make sure all screws are secured properly to avoid board falling down.
8.  Please carefully read the installation manual and follow the instructions. Vibe is not liable to injuries 

caused by improperly following the manual.

9.  Please contact us directly if you have any questions when reading the manual.

Summary of Contents for V55N203 Series























Reviews: