13
• For easy access to the storage content, you must pull the
shelves approximately 1/3 out of the rail compartment,
however this unit was designed with a notch on each sides
of the shelf tracks to prevent bottles from falling.
For VK 810/ VK 900
• When removing any of these shelves out of the rail compart-
ment, To fit or remove the shelf, tilt the shelf as per the
diagram and simply pull out, or push in the shelf until it sits
on the support brackets securely.
For VK 902/VK 922/VK 933
• Put the shelf gap(left and right) under the square plastic
block, uptilt the shelf,then pull the shelf from the Wine
Cooler.
Note
• If the unit is unplugged, power lost, or turned off, you must
wait 3 to 5 minutes before restarting the unit. If you attempt
to restart before this time delay, the Wine Cooler will not
start.
• When you use the wine cooler for the first time or restart
the wine cooler after having been shut off for a long
time, there could be a few degrees variance between the
temperature you select and the one indicated on the LED
readout. This is normal and it is due to the length of the acti-
vation time. Once the wine cooler is running for a few hours
everything will be back to normal.
Door Lock
(For VK 902 VK922 VK 933)
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the
User’s Guide. Insert the key into the lock and turn it counterclock-
wise to unlock the door. To lock the door do the reverse operation
making sure metal pin is engaged completely. Remove the key
and place it in a secure place for safekeeping.
How to change the door opening
This appliance has reversible doors but is delivered with a right
hinged door. The left hand hinge kit comes with the unit (in the
box), should you wish to reverse the hinge on your unit.
For model VK 810 and VK 900
