14
3.3 Operation for
Zero Adjustment
1 Place the container on the balance.
As you place the container, the
balance indicates its weight.
2 Reset read-out indication to zero.
Press the Zero key.
The container is subtracted and the
balance indicates zero.
3 Load the sample to be weighed.
The balance will now indicate only
the weight of the sample loaded in
the container.
☆
Weighing only the weight of an added sample
4 Resetting the indication to zero
Press the Zero key.
The total weight of the sample
loaded on the measurement pan is
indicated as zero.
5 Adding samples to be measured
The balance indicates only the
weight of an added sample.
When the weight (of a sample)
currently loaded on the
measurement pan is reset to zero
with the Zero key, as mentioned
above, only the weight of the sample
will be measured.
Summary of Contents for AJ-NT/DBNT Series
Page 2: ......
