25
☆
Key Points of the Procedure
☆
1.
While samples are being saved, the value indication disappears temporarily, and only the [M]
mark flashes. If the balance is affected by wind or other vibrations during this process, the
saving time may be prolonged.
2.
If [L-Err] appears briefly, it indicates one of the following states:
(1) The weight of the reference sample is insufficient.
For the limit weight that can be saved (% limit weight), please refer to “13. Specifications,”
on page 41.
(2) While setting up the reference value in Step 2, the Set key has been pressed while the
samples were loaded on the balance.
※
If [L-Err] appears, sampling has been interrupted and the sample value being processed will
not be saved.
3.
The minimum intervals between percentages in the unit switch from 1%, to 0.1%, to 0.01%,
depending on the reference weight from the sampling.
Summary of Contents for AJ-NT/DBNT Series
Page 2: ......
