background image

PREFACE 

Thank you for purchasing an AJ Series electronic balance.    This is a precision instrument equipped 
with exacting mechanisms in a compact body.    The AJ series provides enhanced functions, including 
a counting mode for stock control of parts, and a limit function for measuring constant quantities by 
consecutive weighings.    Despite its many functions, the balance is easy to operate and features 
user-friendly keys.    Furthermore, the large liquid-crystal display provides excellent visibility, and the 
instrument’s high speed and stability

intrinsic to a tuning fork design

help boost operational efficiency.     

Before using the balance, please check that the following items have been included in the 
package.

     

Should you find any missing parts, please contact our local dealer.   

(1)  Main unit of balance 

 

(2) Measurement pan  

(one round or square pan) 

 

(3) Pan base 

(one small for the round-pan 
balance; one large for the 
square-pan balance) 

 

(4) Windshield  

(one for round-pan 
balance only) 

 

(5) AC adapter (one) 

 

(6)  DIN5P plug set 

 

(7)  Operation manual (one) 

 

 

 

S

P

F

0

ON/OFF

Summary of Contents for AJ-NT/DBNT Series
















































Reviews: