28
3-2-2 (2) Numeric value setting method
Input numeric value of the unit weight by key operation.
1
Select whether or not employ the previous
recorded unit weight.
- Press [3]/[4] key to select whether or not
employ the previous data.
When there is no data record, this step is
skipped.
- Press [3]/[4] key to select.
NO: Change
YES: Not Change
When <YES> is selected, go to step 4.
2
Select the “unit weight value input mode”.
- Press [1]/[2] key to select.
PCSWGT: Unit weight value input
- Press [4] key to fix.
3
Input the unit weight.
Numeric value input
(Refer to “2-5-3 Numeric value input”)
- Input the unit weight.
- Press [4] key to fix.
4
Put samples in place to count result.
- Place a container (tare) on the weight pan.
- Press [Tare] key.
- Place the samples.
The count result is displayed.
3-2-2 (3) Switching the display at Counting mode
1
Press [1]-[4] keys to switch the display.
<ADD> and <TOTL> can be used when the <14 ADDITION> is "Valid".
