39
3-13
“Simple SCS(Self Counting System) method” setting
“Simple SCS method” is auxiliary function for Counting mode.
First, put a set number of samples in place. Next, put up to two times the set number of additional
samples in place. The scale will automatically update the average sample weight. Repeating this step
allows accurate counting.
1
Select the simple SCS.
- Press [Menu] key, then press [1]-[4] keys to go
to <1C SIMPLE SCS>.
- Press [4] key to change the setting value.
- Press [1]/[2] key to select.
OFF: Invalid
O
Ｎ
: Valid
- Press [4] key to fix.
2
Exit the setting menu.
- Press [Menu] key to shift to the measuring
mode.
3-14
Range mode setting
This function is to enable/disable automatic readability(d) switching of HJ62K0.1DS(R) (double-range
model).
Single-range mode : Double-range mode is disabled, readability(d) is fixed to larger range and
does not switch automatically according to the load.
Double-range mode : Available only on HJ62K0.1DS(R).
Readability automatically switches according the GROSS weight of the load.
1
Select the range mode setting.
- Press [Menu] key, then press [1]-[4] keys to go
to <1D RANGE MODE>.
- Press [4] key to change the setting value.
- Press [1]/[2] key to select.
SGL: Single-range mode
DBL: Double-range mode ON for
HJ62K1DS(R)
- Press [4] key to fix.
2
Exit the setting menu.
- Press [Menu] key to shift to the measuring
mode.
