56
2
Select the communication setting.
Refer to the step 1 to key operation for setting.
Select the communication condition.
Set list
6 : 6-digit numeric format
7 : 7-digit numeric format
8 : 8-digit numeric format
CSP6 : CSP 6-digit format
CSP7 : CSP 7-digit format
CBM : CBM format
Select the output conditions.
Set list
0 : Output stop
1 : Continuous output at all times
2 : Continuous output at stable
times (Output stop at unstable
times)
3 : One-time output
immediately after [Output]
key is pressed
4 : Auto output
(One-time output when the
scale is loaded and stabilised.
The next output for another
sample loading is executed
once the indication becomes
stabilised at less than or equal
to zero by unloading, zero-
point adjustment or tare-
subtraction.)
5 : One-time output every time
when the scale reaches stable
(Output stop at unstable times)
6 : Continuous output at
unstable times and one-time
output every time when the
scale reaches stable
7 : One-time output after [Output]
key is pressed and the scale
reaches stable
Select the comparator output.
Set list
0 : As per the output setting
1 : Output when discrimination result is OK or absent
Select the baud rate.
Set list
1200 : 1200 bps
2400 : 2400 bps
4800 : 4800 bps
9600 : 9600 bps
19200 : 19200 bps
38400 : 38400 bps
57600 : 57600 bps
115.2 k : 115200 bps
Select the parity bit.
Set list
OFF : None
ODD : Odd number
EVEN : Even number
Select the stop bit.
Set list
1BIT : 1 bit
2BIT : 2 bit
Select unused high order digit.
Set list
ZERO : Filled with 0 (0x30)
SPACE : Filled with a blank space (0x20)
Select the response command format.
Set list
1 : “A00/Exx” format
2 : “ACK/NAK” format
Select the net value status.
Set list
OFF : Not appended
ON : Appended
Select the time stamp setting.
Set list
OFF : Not appended
ON : Appended
