2
■Do not use the indicator unit in a wet/dusty location when AC adapter jack cover or
D-sub 9p connector covers are opened.
That may cause an electric shock, short-circuiting or failure.
■Do not connect to the AC adapter cord or communication cable with its connector or
jack being wet.
That may cause an electric shock, short-circuiting or failure.
■Do not install the scale in a place where it is directly exposed to airflow from air-
conditioning or heating equipment.
Due to changes in the ambient temperature, the scale could fail to accurately weigh samples.
■Do not install the scale in a place exposed to direct sunlight.
The internal temperature of the scale could rise, and the scale could fail to accurately weigh samples.
■Do not install the scale where the floor is soft.
When a sample is placed on the scale, the scale could slant and fail to accurately weigh samples.
■Do not install the scale in a place where the ambient temperature or humidity
change significantly
.
The scale could fail to accurately weigh samples.
■Do not apply excessive force to or impact the scale.
Doing so could damage or result in failure of the scale. Carefully place samples on the scale.
■Do not use volatile solvents for cleaning anything other than the weighing pan.
The key panel, dust/waterproof packing or other resin components of could deform, and the scale no
longer maintains the dust/waterproofness. Wipe each unit using dry cloth or a cloth moistened with a
small amount of neutral detergent.
■Adjust (calibrate) the scale when it is installed or relocated.
Failure to do so might result in measurement errors. To ensure accurate measurements be sure to
adjust (calibrate) the scale.
■Check for an error periodically.
Use environment and chronological change cause an error in measured value, leading to an inaccurate
measurement.
■Unplug the AC adapter from the receptacle when the scale is not going to be used
for a long period of time.
Unplug the scale from the receptacle to save energy and prevent degradation.
■Always adjust the level of the scale before use.
A tilted scale generates errors which might cause inaccurate weighting.
■For proper disposal
This product including accessories may not be disposed of in domestic waste in conformance with
the specific requirements in your country, such as the European Directive 2012/19/EU on waste
electrical and electronic equipment (WEEE).
When you dispose of this product, please contact your local authorities or dealer and ask for the correct
method of disposal.
