89
Appendix 6
Operation with internal rechargeable battery
This function can only be used with a scale equipped with optional internal rechargeable battery (factory
option).
Be sure to use the AC adapter supplied with the scale. A different AC adapter may cause the
batteries to generate heat or explode.
(1)
(2)
(3)
When you use the scale for the first time after you purchase it, battery operation time may be
shorter than usual because of natural discharge.
If nothing is displayed or the display is turned off in a minute after you turn on the scale or the
display is turned off after beep (PiPiPiPiPiPi) sound the battery may be weak recharge the battery
or operate the scale on the AC adapter.
When changing to <
> mark, you cannot operate “Span adjustment with internal weight”,
“Span test with internal weight” and “Calibration of the internal weight”. When you use those
functions, please charge or use it with AC adapter.
Appendix 6-1
Specifications of battery
Installation:
Factory option, built-in type
Type:
NiMH
Ratings:
6.0 V dc, 2100 mAh
Charge time:
About 12 hours
Operation time:
About 10 hours of continuous operation (backlit off)
Can be recharged:
More than 300 times
Appendix 6-2
Recharging battery
A <
> icon is displayed when the scale is operated with battery. As the battery get weaker, the icon
is changed from <
> to <
>. When the icon changes to <
> (flashing), follow the steps
below to charge the battery.
(1) Connect the AC adapter supplied with the scale.
(2) Turn the scale off.
(3) Wait about 12 hours until the battery is fully recharged.
