4.4 Interface
Displayed unless input/output is stopped in Interface of Function 1.
Item
Set Value
Description
Stop output
Output continuously at all times
Output continuously if stable (Stop output if unstable)
Output once when the Print key is pressed (whether the
balance is stable or unstable).
Output once when the balance is stable. Output when a
substance is lifted to cause the display to indicate a value
below 0, and then another substance is put on to make the
balance stable.
Output once when the balance is stable. Stop output when
unstable. Output once when the balance is stabilized again
even if it is not reloaded (the output includes zero).
Output once when the balance is stable. Output
continuously when unstable. Output is stopped after a
single output when the balance is stable even if it is not
reloaded.
Output once when Print key is pressed if the balance is
stable.
Output once immediately after a specified interval.
Output Control
Output once immediately after a specified interval if the
balance is stable.
1200 bps
2400 bps
4800 bps
9600 bps
Baud Rate
19200 bps
None
Odd
Parity
Even
Displayed when Interface [
] is set to
[
] or [
].
7 bits
Data Length
8 bits
1 bit
Stop Bits
2 bits
Displayed only when the setting is
[
].
Embed 0 (30H).
Unused High Order
Digits
Embed space (20H).
Use A00 and Exx.
Response
Commands
Use ACK and NAK.
A star (
) denotes a factory setting.
The data interval in continuous output is 0.1 to 1 second. (The interval varies depending on the state of
weighing and other factors.)
18
