8 Limit Function
The limit function judges a weight based on limit values that you have stored on the balance.
When one or two points are set, a dot (
) is displayed next to one of HI (high), OK (proper), and
LO (low) to indicate the result. When three or four points are set, the judgment result is displayed
as a bar graph to indicate a rank.
8.1
Setting the Limit Function
Make the settings of the limit function in Function 1. The limit function provides different setting
items. Read Section 4.3: Limit Function carefully to set them.
8.2
Judgment and Saving
A limit value can be judged in the following two ways. Select an appropriate one in Function 1.
(1) Judge by absolute values
Specify an upper weight limit or a lower weight limit directly.
･･････
･･････
･･･
･･････････････････････
(2) Judge by deviation values
Specify an upper limit or a lower limit with respect to a
reference weight.
A limit value can be stored in the following two ways. They can be used in combination with either
of the above judgment methods.
(1) Put actual samples on the balance
Put an actual sample on the balance, and save the
weight as a limit value.
(2) Enter
values
Enter a limit value using the keys.
* Once a limit value is entered, it is held after the balance is turned off.
* You can set separate limit values for the weighing machine, parts counting, percentage
weighing, and unit converting functions.
* When you enter a limit value, it is treated differently between the two judgment methods. (Refer
to Caution 9 on page 32).
8.3
Display of Judgment Results
When one or two points are set, a dot (
) is displayed next to one of HI, OK, and LO in the left of
the display.
Judgment
Result
When one point (lower limit)
is set
When two points (lower and upper limits)
are set
HI (high)
N/A
Weight > Upper limit
OK (proper)
Lower limit
≤
Weight
Lower limit
≤
Weight
≤
Upper limit
LO (low)
Lower limit > Weight
Lower limit > Weight
When three or four points are set, a bar graph is displayed to indicate a rank.
Rank 4
Rank 3
Rank 2
Rank 1
Rank 5
4点設定
3点設定
3 points
4 points
A bar graph to indicate a rank is displayed.
Each rank consists of 8 bars.
27
