11 Various Functions
11.1
Auto Sleep Function
This is a function to turn off the display when the balance is left to stand in measurement mode for
about 3 minutes. This function can only be used when the balance is operated on the AC adapter.
To use the auto sleep function, enable it in Function 1 [
].
When the auto sleep function is enabled, the Sleep lamp (LED) lights up.
To exit sleep mode, touch the pan or press a key.
Caution:
The auto sleep function does not work under the following conditions:
1. You are setting Function 1, Function 2, a time or date, or the interval function.
2. An object is put on the pan, and the display is not stable.
3. The balance is operated on batteries.
11.2
Auto Power Off Function
This is a function to turn off the balance when the balance is left to stand in measurement mode for
about 3 minutes. This function can only be used when the balance is operated on batteries. This
function saves battery capacity.
To use the this function, enable it in Function 1 [
].
Caution:
The auto power off function does not work under the following conditions:
1. You are setting Function 1, Function 2, a time or date, or the interval function.
2. An object is put on the pan, and the display is not stable.
3. The balance is operated on the AC adapter.
11.3
Set Unit Function
This is a function to allow you to select two units (unit A and unit B) and switch between the units.
Which unit to display can be set in Function 1. You can also set the same unit for unit A and unit B.
Pressing the Function key switches the unit between unit A and unit B.
Caution:
To use unit B, select the weighing machine function in Function 1 [
]. Unit A can be
used in all modes.
38
