Example:To change the default factory settings to pound units use [
] in the factory
settings. (cont.)
3
Pressing the [Set] key to restore measurement mode.
Pressing the Set key will reset the
measurement mode
4
Pressing the [Function] key to change the units of
measurement
Press the Function key.
Each press of the key changes the units
of measurement to be displayed, as
follows:
[
g
g
g
g
]
→
[ct]
→
[lb]
→
[
g
g
g
g
]
→
· · ·
☆
☆
☆
☆
Key Points of the Procedure
☆
☆
☆
☆
1.
When set values are entered in the function items [
] to [
] prior to use, the desired
unit of measurement to be displayed can be selected simply pressing the Function key. For
more information on the units of measurement that can be set, please refer to “4.2 Description of
Functions,” on page 13.
2.
The units are displayed in the same sequence as the settings made from [
] to [
].
3.
If [
] is set, no unit of measurement will be displayed, even when units of measurement are set
in subsequent items.
4.
[
] cannot be set in [
].
5.
If the same unit of measurement is set multiple times, the second time (and all subsequent times)
the unit(s) occurs, it will be ignored when the display switches.
16
6. Calibrating the Balance
g
gg
g
g
