※
The numbers in ( ) indicate reference pages
Symptom
Cause
Possible remediation
There is no indication on
the display.
The AC adapter is not connected.
Dry cell battery is not installed.
The capcity for the dry cell battry is low.
→
Check that the AC
adapter is connected (8).
→
Install a dry cell battery(8)
→
Replace the dry cell
battery(8)
The display is unstable.
[M] remains flashing
without changing.
The balance is subject to air currents or
vibration.
The balance is situated on an unstable
surface.
An object is contacting the sample being
measured, the measuring pan, or the tare.
→
Check Precautions on
Use (2–4).
Weight indication
contains an error.
An error was made in the tare subtraction
procedure.
The adjusters remain lifted, resulting in an
incorrect level.
The indication values are inconsistent
after long hours of use, or because the
balance has been moved to a new
location.
→
Review the tare
subtraction (10).
→
Check the level (8).
→
Execute span adjustment
on the balance (17).
[
] appears
before the capacity is
reached.
Gross weight exceeded the capacity of the
balance (weight range = con
weight of sample).
A section of the mechanism is damaged.
→
Check the total weight.
→
Execute tare subtraction
again.
→
Contact our Technical
Service Division or your
local dealer.
[
] is
displayed.
A foreign object is caught between the
measuring pan (pan base) and the balance.
A section of the mechanism is damaged.
→
Remove the measurement
pan and examine the
surface beneath it.
[
] is
displayed.
[
] is
displayed.
The balance is exposed to static electricity
or noise.
The electrical system of the balance is
malfunctioning.
→
Contact our Technical
Service Division or your
local dealer.
During span adjustment:
[
] is
displayed.
[
] is
displayed.
[
] is
displayed.
A weight heavier than the capacity was
used.
The reference weight is less than 50% of
the capacity.
Calibration produced an error of 1.0% or
more.
→
Check that the span
adjustment procedure was
performed correctly (17).
Under dry cell battery,
or rechargeable battery
installation :
The indication
disappears.
[
] flashes.
No indication .
The automatic power-off function was
activated.
(SA/CA-E)
The rechargeable battery capacity is low.
(SA/CA-DB)
The dry cell battery capacity is low.
→
Switch on the power again.
Deactivate the Automatic
power-off function, if
necessary. (13).
→
(SA/CA-E) Recharge the
battery. (26).
→
(SA/CA-DBE) Replace the
dry cell battery. (8)
→
Operate the balance with
the AC adaptor.
28
12. Specifications
