Grounding instructions
This product must be grounded. If the product fails,
grounding provides a minimum resistance path for the
current and thus reduces the risk of electric shock. The
original plug of this product is equipped with a grounding
conductor. For safety reasons, the grounding plug must
be plugged into the appropriate socket and the socket
must be properly installed and grounded in accordance
with all local codes and regulations.
Power MINI WALK 3 on and off
Category
Description
D
_
1
Power cord
Power switch
D
_
2
=
， =
Power switch icon meaning
on
off
Power on
1
.
Power on
.
2
.
Press the icon on the power switch D_2.
MINI WALK 3
Power off
1
.
Press the icon on the power switch D_2.
2
.
Pull the
power plug out of the
socket.
MINI WALK 3
D
_
2
D
_
1
MINI WALK 3 comes with a power cord and a power
switch. The power cord and the power switch are
located on the right side of the motor cover.
Overview
Failure to follow the instructions may result
in electrical failure.
Never touch the power cord and power switch with
wet hands.
Do not remove the motor cover otherwise there is a
danger of electric shock.
WARNING
Power requirement
The normal use voltage of this product is 110(USA/
Canada) / 220(Europe) volts.
The voltage required for
can be found on
the manufacturer sticker(around the front of the motor
cover). It needs to be used according to the specific
voltage requirements.
MINI WALK 3
Refer to the following grounding diagram.
Power Supply
15
