Vibrafit MINI WALK 3, User Manual

Remote Control(Optional)

H_1                    

H_2                    

H_3                    

H_4                    

H_5                    

M

H_6/H_7           

H_8                    

Status indicator light

Acceleration button

Deceleration button

Start/stop composite button

ode switch button

Wireless transmission indicator

Battery cover

Name 

Description

Front of the remote control

Back of the remote control

H_1

H_2

H_4

H_3

H_5

H_6

H_8

H_7

Key Function

The remote control optional. Use it to control: start, stop, acceleration, deceleration and switch motion modes.

Battery cover

Status indicator light 

Press the remote control button and the indicator 
light turns on. 

Acceleration button

Press the acceleration button, the speed value is first 
rounded up by a multiple of 0.5km/h and when you 
press it again  the speed is incremented by 0.5km/h.

Deceleration button 

Press the acceleration button, the speed value is first 
rounded up by a multiple of 0.5km/h and when you 
press it again  the speed is decremented by 0.5km/h. 

Mode switch button

Used to switch between manual control mode and 
automatic control mode. 

MINI WALK 3

’s remote control uses two batteries

(1.5V NO.7 AAA alkaline battery).Replacing the 
remote control’s batteries is the same as replacing 
a normal TV remote control’s batteries.

Remote control matching steps

You will need to match the remote control with the 

the first time you use it, the 

matching operations are as follows:  
1. Power off the 

;

2. Power on the 

 and turn on the 

power switch, at the same time, press and hold any 
button on the remote control for more than 5 
seconds; 
3. 

 will react and show the following 

figure on the display window:

MINI WALK 3 

MINI WALK 3

MINI WALK 3

MINI WALK 3

’s display window. If it is not successful, 

repeat these steps.

4.Wait until the figure above appears on the MINI 
WALK 3

20