Stop operation
Stop
When your center of gravity moves from the
Acceleration zone and enters the Retention zone, and
then slows down from the Retention zone into the
Deceleration zone and you continue to walk, the
automatically decelerates to the lowest speed
and stops.
from the Acceleration zone
MINI
WALK 3
Stop
from the Retention zone
When your center of gravity moves from the Retention
to the Deceleration zone and you continue to walk, the
automatically decelerates to the lowest
speed and then stops.
MINI WALK 3
24
Deceleration
When your center of gravity moves from the
Acceleration zone to the Retention zone and you
continue to walk,
automatically
decelerates and then maintains a constant speed.
MINI WALK 3
Deceleration from the Acceleration zone
When your center of gravity moves from the Retention
zone to the Deceleration zone and you continue to walk,
automatically decelerates to the lowest
speed and then stops.
MINI WALK 3
Deceleration from the Retention zone
Switch modes
When
is in Automatic control mode:
press any button on the handrail or remote control
(optional),
cancels automatic control
mode and runs the corresponding button command.
MINI WALK 3
MINI WALK 3
The gravity center of the human body
(blue line) is located in the deceleration zone
Motor
cover
When
you
first
use
Automatic
control
mode
,
you
need
to
control
it
when
the
handrail
is
in
Unfold
mode. If you encounter an emergency during
operation, press the Stop button or the Emergency
stop switch, and
cancels Automatic
control mode and stops.
Orthotic
insoles
or
high
heels
are
not
suitable
for
this
mode
.
Automatic control mode requires learning and
adaptation.
You can use this mode completely without the
handrail buttons or remote control and we
recommend it for users with better motor
coordination or experience with a treadmill.
MINI WALK 3
When your body’s center of gravity is located in the
deceleration area of the walking belt, keep moving
in this area to maintain automatic deceleration as
shown in the below figure:
Note:
