6
Problem
Solution
No lights; does not respond to Remote
Control
Check Vibrapower Cordless Belt is charged
by attaching the adapter and switching it on
at the mains. Check socket works with an
alternative electrical product.
Intensity too high!
Adjust intensity using the strength buttons
on the Remote Control.
Vibrapower Cordless Belt making unusual
noises or smells.
Immediately turn off Vibrapower Cordless
Belt and call service centre or Ideal World
for assistance.
Extending the size of the Vibrapower Cordless Belt
ve Vibrapower Cordless Belt from packaging and carry case.To extend the size of the
Vibrapower Cordless Belt, there is an extra length of belt provided. This has hook and loop
tape stitched on to it to secure in place. Slide the extension belt through the metal loop so
that the hook section (shorter section) is first, double this over so that it attaches to the
loop section (longer section) of the extension belt, ensuring you leave enough of the
extension belt to attach onto the belt. Then make sure that the belt fits nicely around the
desired area of your body. Do not leave it so it is loose as the belt will not have the desired
effect.
STORAGE & CLEANING
• Clean the Vibrapower Cordless Belt with a damp cloth and mild detergent only, immedi
-
ately after use. Use a weak solution of anti-bacterial washing up liquid in warm water and a
microfibre cloth to clean your Vibrapower Cordless Belt, be sure to wring out the cloth so
that it is just damp.
• Ensure the Vibrapower Cordless Belt is unplugged from the mains before cleaning is
undertaken.
• Regularly check the cord/cable for damage before storing. Should the cord/cable be
damaged in any way it must ONLY be replaced by the manufacturer or a similar qualified
person in order to avoid a hazard.
• Regularly check the Vibrapower Cordless Belt but do not switch on if it appears to be
damaged or operating incorrectly. Do NOT attempt to carry out any repair to the Vibra
-
power Cordless Belt in any way as this must in all cases be referred to a suitably qualified
technician.
• Never pull the cord/cable to disconnect from the power outlet. Always grasp the plug
and pull to disconnect.
• Remove the plug when not in use.
TROUBLESHOOTING
