7
•
Cleaning the Vicair Active SmartCell liners
Do not machine wash the filled SmartCell
liners. Do not immerse the filled SmartCell
liners in water or any other liquid. Treat light
stains by wiping the SmartCell liner with a
damp cloth, using a mild detergent. Difficult
spots or stains can be cleaned by first
saturating the spot and then using a soft
brush to loosen the dirt, or by machine
washing the emptied SmartCell liner
(
remove the SmartCells!
) at 60°C. If it is
necessary to remove the cells for cleaning,
note the number of cells in each SmartCell
liner. (60°C = 140°F)
6 7 8
Disinfecting your Vicair Active
Warning!
In case of soiling with body fluids, and
when transferring the product to another user,
the product must be disinfected to avoid cross
contamination. Clean the cover, foam inlay and
SmartCell liners as instructed above. Preferably
use an anti-bacterial detergent. After cleaning
spray your cover, foam inlay and SmartCell liners
with a disinfectant. Bend the cover
compartments outwards to make sure the spray
gets into the gaps.
(Re)assembling your Vicair Active
The Vicair Active is fully assembled on delivery.
When it needs to be (re)assembled, for instance
after cleaning, follow the assembly instructions
underneath. The instructions correspond to
image i (I, II & III) on the Quick Installation
Guide.
Placing the foam inlay in the cover (image i - I)
• Completely open the zipper at the front of
the cover.
• Place the foam inlay in the cover, the sloping
side pointing to the back of the cushion and
the contoured side on top.
• Close the zipper. Make sure you do not
damage the foam inlay.
Adjusting the number of SmartCells in the
SmartCell liners (image i - II)
Warning!
Vicair B.V. recommends to adjust the
filling grade under the direct supervision of your
therapist or technical advisor.
The number of SmartCells in each SmartCell
liner depends on the size of the cushion. You
can find the default filling grade on the label
inside the cushion cover. When it’s necessary to
adjust the number of SmartCells, follow these
steps:
• Open the SmartCell liner’s zipper and add or
remove the desired number of SmartCells.
• Close the zipper. Make sure that you do not
damage the SmartCells.
Placing the SmartCell liners in the cover (image
i - III)
• Completely open the zipper at the back of
the cushion cover.
• Place the SmartCell liners in the cover. Make
sure you place the correct SmartCell liner in
each compartment. The SmartCell liner’s
label states where it should be placed.
• Close the zipper. Make sure that you do not
damage the SmartCell liners.
EN
Summary of Contents for Vicair Active
Page 1: ...USER MANUAL...
