DUAL DISPLAY MULTIMETER
USER’S MANUAL
CAUTION
THIS IS AN IEC SAFETY CLASS
1
PRODUCT. THE GROUND WIRE IN THE LINE CORD MUST BE
CONNECTED FOR SAFETY.
WARRANTY
Our company warrants to the original purchaser that each product it manufactures will be free from defects in
material and workmanship under normal use and service for a period of one year from date of purchase. Our
company’s warranty does not apply to fuses, test leads or any product which, in our company’s opinion, has been
misused, altered, or damaged by accident or abnormal conditions of operation or handling.
To obtain warranty service, contact the nearest Service Center or send the product, with a description of the
difficulty, and postage prepaid, to the nearest Service Center. We assume no risk for the damage in transit. We will,
at its option, repair or replace the defective product free of charge or refund your purchase price. However, if we
determine that the failure was caused by misuse, alterations, accident or abnormal condition of operation or
handing, you will be billed for the repair and the repaired product will be returned to you transportation prepaid.
SHIPPING TO MANUFACTURER FOR REPAIR OR ADJUSTMENT
All shipment of our company’s instruments should be made via United Parcel Service or “Best Way” prepaid. The
instrument should be shipped in the original carton; or if it is not available, use any suitable container that is rigid
and of adequate size. If a substitute container is used, the instrument should be wrapped in paper and surrounded
with at least four inches of excelsior or similar shock-absorbing material.
CLAIM FOR DAMAGE IN SHIPMENT TO ORIGINAL PURCHASER
The instrument should be thoroughly inspected immediately upon original delivery to purchaser. All material in the
container should be checked against the enclosed packing list. The manufacturer will not be responsible for
shortages against the packing sheet unless notified immediately. If the instrument is damaged in any way, a claim
should be filed with the carrier immediately. (To obtain a quotation to repair shipment damage, contact the nearest
Service Center.) Final claim and negotiations with the carrier must be completed by the customer.
1
